Serving South Chicago Heights IL and Highland IN with Equipment Rentals and Party Rentals since 1965

Grinders::
Grinder flr edco 1 disc elec

Where to find Grinder flr edco 1 disc elec in South Chicago Heights

Image for reference only
Actual item may look different
Click on image for larger view

3 Hour: $63.00
Daily: $93.00
Weekly: $328.00
Comments:
  • Used to repair concrete surfaces and remove old finishes or smooth rough areas.
  • Can be used on steel,wood block,brick&stone and many other surfaces but primarily used on concrete floors.
  • This unit has 1 disc with 3 pockets and can take PCDyma-Serts, dymaserts, stripserts, scarifiers, or grinding stones.
  • Draws 17 amps at 120 volts. Needs a 20 amp outlet
  • 11" working width-Weight 152 pounds
  • Will grind 200-250 sq ft per hour at 1/32" deep w/ dymaserts
  • Unit comes with a 50' 12 ga cord
  • Can use 1 additional 50' 12 ga cord but no more
  • 90% of grinding jobs will use either dymaserts or stripserts or both
  • Stripserts are used to remove coatings without grinding into the concrete floor itself. They work very well if a putty knife or pocket knife can remove the material
  • Remove mastics (glue), paint build-ups, resins, tar, fiberglass
  • Stripserts are billed per edge used. Each carbide blade has 4 edges
  • Grinding stones are used for smoothing trowel marks or rough finishes and can be used along with sand and water to create a slurry for faster grinding
  • We stock 10 grit stones
  • Dymaserts can grind up to 5 times faster than stones and are typically used to grind up to 1/32" deep
  • Dymaserts are billed per day per dymasert
  • Good for leveling or smoothing rough surfaces or trowel marks and removing epoxy thin-coats, thin mastics (glue), and thin-set
  • PCDyma-Serts: More agressive than regular Dymaserts for thicker coatings.
  • Will leave a medium texture and medium scratch marks
  • Scarifiers are used for breaking up hard surfaced deposits of oil-dri, fiberglass, rubber grout, or plastic
  • Texturing slippery floors
  • JOB SITE QUESTIONS:
  • 1 - WHAT ARE YOU LOOKING TO DO?
  • 2 - WHAT IS THE MATERIAL TO BE REMOVED?
  • CONCRETE, ASPHALT, SOME KIND OF COATING, TILE
  • 3 - WHAT IS THE THICKNESS OF THE MATERIAL?
  • 1/16", 1/8", 1/4", ETC
  • 4 - WHAT IS CONDITION OF THE MATERIAL?
  • FLAKING, SOLID
  • 5 - HAS ANY OTHER REMOVAL PROCESS BEEN ATTEMPTED?
  • 6 - WHAT TYPE OF SURFACE TEXTURE DO YOU WANT TO END UP WITH?
  • 7 - WHAT WILL BE APPLIED OVER THE PREPARED SURFACE?
  • 8 - SIZE OF THE JOB? DIVIDED INTO SECTIONS?
  • 9 - IS DUST CONTROL A FACTOR?
  • 10 - TYPE OF MACHINE POWER DESIRED?
  • GAS, ELECTRIC, PROPANE?
  • 11 - DO YOU NEED TO GET RIGHT UP TO A WALL?
Add of the above items to my quote request
for a period of   3 hour(s)   day(s)   week(s)  





Also check the following item(s) related to the above:

* Prices are subject to change.


* Please call us with any questions about our grinder flr edco 1 disc elec in South Chicago Heights IL and Highland IN.

 

Serving Highland IN, South Chicago Heights IL, Schererville, Munster, Lansing, Sauk Trail, Steger, Crete, Park Forest, Lynwood, South Holland,
Chicagoland and Northwest Indiana with equipment rentals, tool rentals, party rentals, new equipment sales, and parts & repair.

Copyright 2020 RentalHosting.com

Powered by Point-of-Rental - Last Update: 12/12/2019 1:59:47 AM